MegaPulse D5-PF:
Defib-proof and Energy Reduction Tester D5-PF, IEC 60601-2-27 Ed 3.0

The most advanced medical surge tester available, the D5-PF is built to provide defib-proof testing to the requirements of:

• IEC 60601-1:2005 (Issue 3) Figure 9 and 10 Defib-proof Differential- and Common-Mode Test  (IEC 60601-1 Figure 50 in older versions).
• IEC 60601-1:2006 Figure 11 Energy Reduction Test;
• IEC 60601-2-4: 2010 Figure 201.110 Overload Test (optional)
• IEC 60601-2-34 Issue 2 (optional);
• IEC 60601-2-34 Issue 3 (included);
• IEC 60601-2-49;
• EC-13;
• EC-53;
• IEC 60601-2-25:2011;
• IEC 60601-2-27:2011.

This is an IEC 60601 Defibrillation-proof tester.  For the Energy Reduction test, joules consumed in the 100Ω resistor are immediately displayed after each pulse. The MegaPulse D5-PF tests protection against the effects of defibrillation (Common Mode, Differential Mode) and Energy reduction test (EC-13) and as noted in the Standards shown above. The MegaPulse D5-PF outputs a 360J Defib-proof test pulse per IEC 60601-1 for the Energy Reduction Test.  It can also be used as a Defibrillator Lead Tester.  

Detailed Information about the MegaPulse D5-PF

White Paper - Oscilloscope Setup to Capture Y1-Y2 waveform in accordance with Iss. 3 Fig. 10

Available Options

D5-PF Mains Voltage (leave blank for 120V) *                        --- Please Select ---                                              00-MP220 - 220V Only Operation                                            (+$220.00)                                                                                          00-MP230 - 230V Only Operation                                            (+$220.00)                                                                                          00-MP240 - 240V Only Operation                                            (+$220.00)                                                                                        

 00-MP-ESTOP-01 - Emergency Stop Option (When Activated Isolates Outputs and Discharges Main Capacitor. Option adds 3U level) (+$2,200.00)

 00-MP-BB-001 (Medical Breakout Box. The Breakout Box is a separate box) (+$1,800.00)

 00-MP-RC-01 (MegaPulse Remote Control 01) (+$600.00)

 00-MP-RC-02 (MegaPulse Remote Control 02) (+$650.00)

 00-MP-RC-01-CA-20 (MegaPulse Remote Control Cable 20ft) (+$200.00)

 00-SG (Sig. Gen. for IEC 60601-2-27, 10Hz 20Vp-p) (+$1,150.00)

 00-34 (Testing to IEC 60601-2-34, Invasive Blood Pressure Test, Ed. 2.0 only, adds 3U level) (+$2,700.00)

 00-2-4 (Testing to IEC 60601-2-4:2010, Defib Overload Test, 10 ohm output, adds 3U level) (+$3,850.00)

 00-100X (Direct Energy Measurement. Opens 100 ohm resistor for Fluke 7000DP/7010,100 ohm setting) (+$285.00)

 00-GVAC (Gigavac Vacuum Relay Switch for D5-PF Trigger) (+$2,550.00)

 00-CASE-6U (Pelican Case with Foam Interior for D5-PF without option 00-34 or 00-2-4) (+$610.00)

 A2LA-TECH-MP (ISO 17025 Calibration by Techmaster, adds 2 week to delivery time) (+$295.00)